News

Firmware updates online for the LRP multi speed control!
 

2013-01-21
As of today, the new firmware versions of the LRP Flow speed control are available for download. In order to enable you to adjust your high-end speed control even better to Offroad, Onroad or Stock and to better utilize its potential.

 
Modified and Stock racing with only one speed control … the LRP Flow showed that this works perfectly. The best example is the great result of the LRP Flow speed control at the IFMAR WC 2012 in the Netherlands. It was amongst the most used speed controls in the A-Mains TC and 1/12. Teaming up with Ronald Völker, 2 podium finished could be achieved. The victory of Ryan Mayfield at the ROAR Super Offroad Nationals 2012 headlines amongst other things the extra class of the Flow in the Offroad segment.

To adjust your flow speed control even better and more target-oriented to the specific requirements of an Onroad Modified, Offroad or Stock race, you can now download special firmware versions.  With these versions you have finer adjustment possibilities available that are needed to beat your opponent in the decisive moment. 
 
V3.3 – Offroad Modified Software:
1. optimised values for various mode settings, so you can adjust in finer steps for Offroad racing compared to
    standard v1.4 firmware.
    > Refer to mode spec sheet for exact details
2. adjusted brake response with separate brake adjustment
3. adjusted drive frequency for smoother control
 
V4.0 – Onroad Modified Software:
optimised values for various mode settings, so you can adjust in finer steps for Onroad Modified racing compared to standard v1.4 firmware.
> refer to mode spec sheet for exact details

V5.0 – Stock Only Modified Software:
optimised values for various mode settings, so you can adjust in finer steps for Stock racing compared to standard v1.4 firmware.
> refer to mode spec sheet for exact details
 
You’ll find the updates on the product pages or directly in our service section!  
 
Important notice!
> For a quick an easy update of the speed control software (firmware), the optional LRP USB Bridge Spec.2 (#81801) is required.  
>For the update of the latest firmware you need the software v2.0.7 on your computer.
>Each firmware-update replaces always the previous setting on your speed control.